Is your Yuoto Thanos not hitting like before? Maybe it blinks at you, or the taste seems off. Small problems can ruin a good experience. But don’t worry. Most common issues have simple fixes you can try at home. This guide will help you solve them fast and get back to a smooth vape.

Device not turning on:

First, check the basics of your Yuoto Thanos. Plug the charging cable firmly into a wall socket and your device. Let it charge for at least thirty minutes. A completely drained battery might want a short charge before showing any signs of life. If nothing happens, try a different cable or power adapter. The problem is often a faulty charger, not the device.

Weak vapor production:

Is your device charged? A low battery causes weak vapor. If the battery is full, check the pod. The e-liquid might be low. Refill it or use a new pod. Airflow can also block vapor. Check for dust or pocket lint covering the air holes. Clean these small openings with a toothpick or a dry cloth.

Weird or burnt taste:

A burnt taste usually means the pod is empty. The wick inside is dry and burning. Fill the pod with e-liquid and wait five minutes. This lets the liquid soak the wick. If the bad taste stays, the pod is likely finished. Replace it with a fresh one. Using a device while the liquid is very low causes this.

Device leaking liquid:

Leaks are messy. Ensure your pod is clicked into place correctly. Take it out and push it back in until it snaps. Check the silicone seal on the pod for damage. Always store your device upright. Laying it on its side can cause leaks. Thinner e-liquids can also leak more easily.

Blinking light errors:

Your device talks through its light. A blinking light often signals an error. Usually, it means a connection problem. Remove the pod and clean the inside of the device with a cotton bud. Look for spilled e-liquid. Dry everything. Put the pod back in firmly. Different blink patterns can mean a low battery or a short circuit. Consult your manual for the specific light codes.

Automatic firing problems:

If your device activates without you pressing the button, act quickly. This is often caused by e-liquid leaking into the internal sensors. Immediately remove the pod. Wipe the inside of the device and the bottom of the pod. Let it air dry completely. If this does not stop it, the device might have a fault and should not be used.